Butcher Block Countertops
Finish There are two alternative finishes which can be applied to butcher block countertops. The mineral oil finish is the one used for cutting surfaces. The oil conditions the wood so that it won't dry out, warp, or crack. Every time you wash the countertop you will remove some of the oil. Therefore, you should re-apply this non-toxic material every 6 weeks or so. Mineral oil is not waterproof, so if the top gets wet, the grain could raise, making the wood feel rough. So having sinks in butcher block countertops is not a good idea. The area around the sink will eventually discolor, turning dark. Cut marks from knives are easily sanded out, but then you should re-oil. Another finish used on wood countertops is the varnique finish. This is a baked on satin polyurethane finish. It is safe for contact with food, and it has a low sheen, which most folks are happy with. You shouldn't cut on butcher block countertops with this finish because cutting will remove the protection, leaving the wood exposed to water and other household liquids. It is extremely difficult to fix cuts in this finish so that you won't notice them. However, if you're not cutting on this finish, the advantage is that it is virtually carefree. It's waterproof, so you can have a sink cut out in it. And you can spill grape juice of red wine on it, wipe it away, and not have a stain. In kitchens that combine stone and butcher block countertops, homeowners usually want to do some cutting on the wood surface, so they want the oil finish. If you only want it for looks, then go with the varnique.
Several companies offer wood countertops in many wood species, at different price points. Hard maple (also known as sugar maple) is the best choice for cutting because it has the tightest grain and is the hardest of the appropriate woods. Lower grades of maple include: western maple, soft maple, and Chinese maple. These are all soft woods and they're not a good choice surfaces that will get a lot of use.
Cherry and walnut are softer than hard maple, but very pretty and more expensive. Red oak is a very rough and grainy option, but is one of the least expensive choices for wood countertops. It might appear that some companies are practically giving away their butcher block countertops. This is because they finger joint random scraps of whatever wood they have and call it a butcher block. Mixed finger-jointed woods can have serious issues in time and you should stay away from them. So don't be like most people who just look at the price. Thickness Thickness is another consideration when buying wood countertops. The standard is 1 1/2" - any thinner than that is not a good idea. This thickness if fine up to 42" in length. Once you get longer, you should go to 1 3/4". Any thicker is not necessary under any circumstances, but some people just like the look of thicker tops. If this is you, think about getting a 1 3/4" top and building up the edge. This will probably save you a lot of money. At 2 1/4" thick (which is the next standard after 1 3/4") the price doubles, and can nearly triple at 3" thick. There is no price per square foot for butcher block countertops, so don't even ask. Have your size, shape, wood species, thickness, finish and cutouts ready for a quote. You have to price each piece because all those elements affect the price.
If you're planning a large renovation, get your hands on HOW TO CONTROL YOUR REMODELING PROJECT. You can learn more about it at this page.
If you have a question, or just want to discuss an issue with me, contact me about your butcher block countertops by clicking here.
If you haven't signed up for the FREE newsletter, here's your chance. Anybody subscribing will get a FREE copy of CHARLIE'S 88 TIPS FOR A BETTER HOME. I'm sure you'll like it.
|
